Saturn Outlook Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
The ball/mount is made from wood, painted dull black. The ball is made from hardwood and is available at any Hobby store i.e. Hobby Lobby, Michael's, Etc. usually sold in a bag of 5 or more @$1.25 or so. Buy a 3/4 inch hardwood diameter ball, also a 1/4 inch hardwood dowel rod, you will also need a 3/8 inch brass spring loaded bullet catch. The bullet catch is to make a snug fit in the cavity.

The body of the mount is made from any wood I used a piece of 2x3 pine.

The ball (Detail "B") must be turned down to .670 thousands of an inch. You can use a wood lathe, drill press or a electric hand drill with a wood rasp & sandpaper. Use a caliper or micrometer to check size.
Finished size must be .670[/color] if ball is to large it won't fit the Garmin socket, if to small it will not be a tight friction fit. After assembly paint the unit when it is dry apply Velcro to the bottom & angled side, press the bullet catch in place, install in lower dash cavity. Follow the drawing & pictures below.
 

Attachments

·
Registered
Joined
·
63 Posts
Very neat idea and implementation!

But doesn't the fact you have to look that far down bring some safety concerns? In my other car where I use my cell phone as GPS navi, I find it very inconvenient if it is placed in the cup holder (cup holders - same location as on the outlook). For that reason I got a vent mount (I hate stuff on my windshield!) Not perfect, but far more convenient and safer IMO.

On the other hand - your mount could be ideal for personal media players, cell phones etc.
 
1 - 3 of 3 Posts
Top