Saturn Outlook Forum banner
1 - 1 of 6 Posts

· Registered
10 Posts
Throttle body getting oil. I got throttle body cleaner and cleaned it, hoses, and air intake plastic body (remove two clamps to remove and clean with throttle body cleaner, one clamp goes to throttle body and other to intake). Remove the PVC valve located in the rear of motor.
. There's another video and GM bulletin saying you have to drill the holes in the pvc valve bigger.
1 - 1 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.