Programing key fob

porchdog said:

I just bought an '08 Outlook and one key fob does not work. I replaced the battery. Is there a way that I can program the key fob myself or do I have to take it to the dealer?
Also as a side note, has anyone seen a car with two sun roofs. The back one does not open and has a curtain that covers the opening with an electric slide devica. Real neat but I have never seen one.

Click to expand...

To access the disply, the vehicle must be in park. The display allows you to match Remote Keyless Entry Transmitters to your vehicle.To match Transmitter to your vehicle:
Relearn Remote Key Method #1
1) Press the trip odometer reset stem until RELEARN REMOTE KEY displays
2) Press and hold the trip odometer reset stem for 3 seconds.
The message REMOTE KEY LEARNING ACTIVE will disply
3) Press and hold the lock and unlock buttons on the first remote at the same time for approximately 20 seconds.
A chime will sound indicating that the transmitter is matched
4) To add additional remotes at the same time repeat step 3. You can program up to 8 remotes.
5) to exit program mode you must cycle the key to lock.
Relearn Remote Key method #2
1) Press the vehicle information button untill Press to RELEARN REMOTE KEY displays
2) Press the set/reset button until REMOTE KEY LEARNING ACTIVE is displayed
3) Press and hold the lock and unlock buttons on the first remote at the same time for approximately 20 seconds
A chime will sound indicatingthat the transmitter is matched
4) To add additional remotes at the same time repeat step 3. You can program up to 8 remotes
5) to exit program mode you must cycle the key to lock

I believe you have to relearn both remotes at the same time so have both remotes with you.
I was able to do this with my Outllok about 7 months ago. I also have the sunroof. Correct the rear sunroof does not open, only the screen opens and closes