Saturn Outlook Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
I'm unable to figure out how to remove the door panel. I removed the two torx screws, but with my door panel tool, I'm unable to get the panel to "pop" out from the metal framing of the door.

I can see the black panel stud point going into the door, but can't get it to dislodge.

I'd appreciate any info on how to do this.
 

·
Registered
Joined
·
17 Posts
Hope this helps. According to AllDatadiy.com there are three torx screws holding the door panel on. Two are under the door handle cover and one is under a cover under the door pull handle.
 

·
Registered
Joined
·
4 Posts
Discussion Starter #3
Ok, I'll try to locate that third screw. But will that still prevent the panel from loosening its' grip on the plastic holders?

Thanks for the info, I'm here in Charleston also. West ashley area.
 
1 - 3 of 3 Posts
Top