Saturn Outlook Forum banner
1 - 12 of 12 Posts

· Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
My windshield washer pump has gone out on my 2008 Outlook - at least, I think it has gone out. When I push the button to wash the front window I hear a click from the interior fuse box/relay and the windshield wipers wipe a few times, however, no windshield cleaning solution is sprayed out.

I have checked the fuse for the front windshield wiper, and it was alright. I am guessing that I need to replace the pump and not the relay. Does anybody know the part number for the pump so that I can order it before pulling the existing pump?

Thanks,
Grant
 

· Registered
Joined
·
396 Posts
I found three different part numbers on rockauto.com Head over there and take a look.
 

· Registered
Joined
·
754 Posts
if this helps any...
this is my 2010 Traverse. location- in front of front wheel. need to pull back on wheel well liner.

 

· Registered
Joined
·
396 Posts
What you need is a wiring diagram; the relay could be bad although I thought replacing the pump would have been a good fix.
 

· Registered
Joined
·
214 Posts
http://sm.gpona.com:9001/si/home.do

This is a GM service manual on line. If the link doesn't work, type it in by hand and you should be able to bring it up.

Go to the site I listed above and input your year, make, and model of vehicle (2008 Saturn Outlook) and click the "Next" button to the right of that info and

Select Service Manual
Select Power and Signal
Select Wire System and Power Management
Select Schematic and Routing Diagrams
Select Power Distribution
Select Figure 5 to see your washer pump schematic
 

· Registered
Joined
·
4 Posts
Discussion Starter · #10 ·
Wow, that is a great resource, thanks! Hopefully I can track down why my pump isn't working.
-Grant

ls973800 said:
This is a GM service manual on line. If the link doesn't work, type it in by hand and you should be able to bring it up.

Go to the site I listed above and input your year, make, and model of vehicle (2008 Saturn Outlook) and click the "Next" button to the right of that info and

Select Service Manual
Select Power and Signal
Select Wire System and Power Management
Select Schematic and Routing Diagrams
Select Power Distribution
Select Figure 5 to see your washer pump schematic
 
1 - 12 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top